BIOS Setup
23
Quick Power
On Self Test
Enabled provides a fast POST at boot-up .
Boot Sequence
Choose the boot device sequence as your need. For
example, ÒA, C, SCSIÓ means BIOS will look for an
operating system first from drive A, drive C, then
SCSI device. Options of this function are:
A, C, SCSI
C, A, SCSI
C, CDROM, A
CDROM, C, A
D, A, SCSI
E, A, SCSI
F, A, SCSI
SCSI, A, C
SCSI, C, A
C only
LS/ZIP, C.
Swap Floppy
Drive
Enabled changes the sequence of the drive A and
drive B to drive B and drive A. (The Default setting
is Disabled.)
Boot Up Num
Lock Status
Choose
On
(default) or
Off
. On puts numeric keypad
in Num Lock mode at boot-up. Off puts this keypad
in arrow key mode at boot-up.
Gate A20
Option
Choose
Fast
(default) or
Normal
.
Memory
Parity/ECC
Check
Choose Enabled or Disabled (default). Set this
option to Enabled when using ECC or Parity check
memory.
Typematic Rate
Setting
Enable this option to adjust the keystroke repeat rate.
Default is Disabled.
Typematic Rate
(Chars/Sec)
Choose the rate a character keeps repeating.
Typematic
Delay (Msec)
Choose how long after you press a key that a
character begins repeating.
