Hardware Setup
SY-6ILA
7
2-2 UNPACKING THE MOTHERBOARD
When unpacking the Motherboard, check for the following items:
Ø
The SY-6ILA 440 LX AGP/PCI Motherboard
Ø
This Quick Start Guide *
Ø
The Installation CD-ROM *
Ø
One IDE Device Flat Cable
Ø
One Floppy Disk Drive Flat Cable
* If your board comes with a driver disc and a paper manual, the Quick Start Guide
and the CD-ROM are not included in the package.
Warning: Do not unpack the Motherboard from its anti-
static packaging until you are ready to install it.
Like most electronic equipment, your Motherboard may be damaged
by electrostatic discharge. To avoid permanent damage to
components ground yourself while working by using a grounding
strap. Otherwise, ground yourself frequently by touching the
unpainted portion of the computer chassis to drain the static
charges.
Handle the Motherboard carefully, holding it by the edges.
You are now ready to start the installation.
2-3 INSTALLATION GUIDE
We will now begin the installation of the Motherboard. Please follow
the step-by-step procedure designed to lead you to a complete and
correct installation.
Warning: Turn off the power to the Motherboard, system
chassis, and peripheral devices before performing any
work on the Motherboard or system.
All manuals and user guides at all-guides.com
