background image

Drivers Installation

SY-6ILA

64

These are the official busmaster drivers as supplied by Intel.

Note: Do NEVER install two types of busmaster drivers on

your system, this will lead to conflicts and system instability.

Therefore, if you install the SOYO SpeedPro Busmaster

driver you can NOT install the Intel Busmaster drivers.

Before installing a new busmaster driver first UNINSTALL the

old busmaster driver.

Ø

 

SOYO CD Xpress Utility

This utility will enhance your CD-ROM Drive data-though put by

using space on the Harddisk as cache. This way application

programs can access data faster. This utility is suitable for Windows

95/98.

Ø

 

System Monitor Utility

Your motherbaord comes with a hardware monitoring IC. By

installing this utility Temperature, Fan speed and Voltages can be

monitored. It is also possible to set alarms when current system

values exceed or fall below pre-set values.

Ø

 

Creative Ensoniq Sound Drivers

These drivers have to be installed if the user wants to make use of

the on-board Creative Soundchip.

Select which driver you want to install and click OK, or click Cancel

to abort the driver installation and return to the main menu.

Note: Once you have selected a driver, the system will automatically

exit the SOYO CD to begin the driver installation program. When the

installation is complete, most drivers require to restart your system

before they can become active.

However, to display the list of all drivers software available with

SOYO Motherboards, click the Display all drivers on the SOYO

CD button. Please make sure to install only the drivers adapted to

your system, or otherwise this cause system malfunctions.

All manuals and user guides at all-guides.com

Summary of Contents for SY-6ILA










































































Reviews: