BIOS Setup Utility
SY-7IWM/L V1.0
71
PNP/PCI Configuration Setup (Continued)
PNP/PCI
Setup
Setting
Description
Note
How to set the BIOS to release the IRQ to the PnP Interrupt pool:
Interrupt
Line
PnP / PCI configuration
Integrated Peripherals
IRQ 15
IRQ 15:
PCI / ISA PnP
On-Chip Secondary PCI IDE:
disabled
IRQ 14
IRQ 14:
PCI / ISA PnP
On-Chip Primary PCI IDE:
disabled
IRQ 12
IRQ 12:
PCI / ISA PnP
Interrupt 12 will be released by the PnP
BIOS automatically if the PS/2 Mouse Port
is not used.
IRQ 7
IRQ 7:
PCI / ISA PnP
Onboard parallel port:
disabled
IRQ 4
IRQ 4:
PCI / ISA PnP
Onboard Serial port 1:
disabled
IRQ 3
IRQ 3:
PCI / ISA PnP
Onboard Serial port 2:
disabled
4.
Your OS may reassign another interrupt to a PCI slot after BIOS passes control
to the OS, especially if you use Windows 95, 98 or NT.
Disabled
BIOS will assgin IRQ for
USB port.
Assign IRQ
For USB
Enabled
BIOS won’t assign IRQ for
USB port.
Default
5.
Your OS may reassign another interrupt to a PCI slot after BIOS passes control
to the OS, especially if you use Windows 95, 98 or NT.
Auto
Default
Slot 1/2/3 Use
IRQ NO.
3-7.2 MULTI I/O ADDRESSES
Default settings for multi-I/O addresses are as follows:
Port
I/O Address
IRQ
Status
LPT1
378H
7
ECP/EPP
COM1
3F8H
4
COM2
2F8H
3
Warning:
If a default I/O address conflicts with other I/O cards
such as sound card, you must change one of the I/O addresses to
remedy to this address conflict. (I/O addresses can be adjusted from
the BIOS Setup Utility)
Summary of Contents for SY-7IWM/L V1.0
Page 91: ...SY 7IWM L V1 0 87...
