Hardware Installation
SY-K7ADA XP
17
2-3.1 CPU Installation
Your SY-K7ADA XP motherboard comes with a CPU retention set kit.
The retention set is used to hold the processor attached to the Socket 462
CPU connector on the motherboard.
Mark your CPU Frequency:
Record the working frequency of
your CPU that should be clearly marked on the CPU cover.
200MHz FSB Athlon CPU
750 MHz (100 x 7.5)
800 MHz (100 x 8.0)
850 MHz (100 x 8.5)
900 MHz (100 x 9.0)
950 MHz (100 x 9.5)
1000 MHz (100 x 10.0)
1.1GHz (100 x 11.0)
1.2GHz(100 x 12.0)
1.3GHz (100 x 13.0)
200MHz FSB Duron CPU
600 MHz (100 x 6.0)
650 MHz (100 x 6.5)
700 MHz (100 x 7.0)
750 MHz (100 x 7.5)
800 MHz (100 x 8.0)
850 MHz (100 x 8.5)
900 MHz (100 x 9.0)
266MHz FSB Athlon CPU
1 GHz (133 x 7.5)
1.13 GHz (133 x 8.5)
1.2 GHz (133 x 9.0)
1.33 GHz (133 x 10.0)
266MHz FSB Athlon Palomino CPU
1500+
1600+
1700+
1800+
Follow these instructions to install your Socket 462 processor correctly.
1. Lift the socket handle up to a vertical position.
