SY-K7VMP
Quick Start Guide
8
In
sta
lla
tio
n
2
2
Installation
To avoid damage to your motherboard, please follow these simple rules
while handling this equipment:
Before handling the motherboard, ground yourself by touching on to an unpainted
portion of the system's metal chassis.
Remove the motherboard from its anti-static packaging. Hold the motherboard by
the edges and avoid touching its components.
Check the motherboard for damage. If any chip appears to be loose, press
carefully to seat it firmly in its socket.
Follow the directions in this section, which is designed to guide you through a quick and
correct method to install your new
SY-K7VMP
motherboard. For detailed information,
please refer to the
SY-K7VMP motherboard User's Manual and Technical Reference
online manual on the CD-ROM package that came with your motherboard.
Gather and prepare all necessary components to complete the installation successfully:
Socket A processor with CPU cooling fan (boxed type)
DDR SDRAM module(s)
Computer case with adequate power supply unit
Monitor
PS/2 or USB Keyboard
Pointing Device (PS/2 or USB Mouse)
Speaker(s) (optional)
Disk Drives: HDD, CD-ROM, Floppy drive…
External Peripherals: Printer and Modem (optional)
Internal Peripherals: Modem and LAN cards (optional)
Note:
If you want to use an external speaker connected to "Line-out" port, please make
sure to use an "amplified speaker" that can generate proper output sound volume.
