Hardware Installation
SY-KT333 DRAGON Plus
18
Your board comes with three DIMM sockets, providing support for up to 3GB
of main memory using unbuffered and non-ECC DIMM modules from 128MB
to 1GB. On this motherboard, DRAM speed can be set independent from the
CPU front side bus speed. Depending on the DRAM clock speed setting in the
BIOS setup, appropriate memory modules must be used. For 100MHz DRAM
speed, use PC1600 memory; for 133MHz DRAM speed, use PC2100 memory;
for 166MHz DRAM speed, use PC2700 memory.
Memory Configuration Table
Number of Memory
Modules
DIMM 1
DIMM 2
DIMM 3
RAM Type
DDR RAM (non-register & non-ECC)
Memory Module Size
(MB)
128 / 256 / 512 / 1024 MB
Step 3 Install Expansion Card
The motherboard has 1 AGP slot and 5 PCI slots.
1. Read the related expansion card’s instruction document before inserting the
expansion card into the computer.
2. Press the expansion card firmly into expansion slot in motherboard.
3. Be sure the metal contacts on the card are indeed seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install
related
driver
from the operating system.
1
92
1
92
