SP Controls Application Note
Mitsubishi XL30U
Revision B
III. Projector Configuration
The Mitsubishi does not respond to power off commands during warm-up. Disabling the splash screen
minimizes the time the projector spends warming.
Disable the splash screen using onscreen menus
:
scroll to the
Installation
submenu. Verify that the
Splash Screen
setting is
OFF
. If not, enter the menu and
toggle the
Splash Screen
setting to
OFF
.
If
Auto Power On
is on, the projector will automatically turn itself on whenever hard power is applied. In
an installation environment, this would occur whenever a blackout disrupts (hard) power to the projector.
We recommend disabling this feature, as blackouts may occur when no one is available to power the
projector off.
The
Auto Power Off
feature automatically shuts the projector off if it does not receive a signal for a
configurable amount of time. You may wish to disable this option and use an Inactivity Shutdown Timer
instead, if available. If using either feature, be sure to familiarize users with the expected behavior.
To disable
Auto Power
using onscreen menus, scroll to the
Installation
submenu and verify that
Sleep
Mode
is set to
OFF.
If not, enter the menu and toggle them to
OFF
.
© 2004-9 SP Controls Inc.
SP Controls reserves the right to modify specifications without notice at any time.
