background image

 

Rev 004, 07/11 

 

© SP Scientific 2011 

Copyright © 2011 SP Scientific. All marks herein are used under license.  

All brand or product names mentioned may be trademarks or registered trademarks of their respective 
companies. 

 

 

 

 

Part Number MNL-049-A 

 

 

Rev 004, 07/11 

 

 

 

 

 

 

 

 

 

 

SP Scientific

 

815 State Route 208 

3538 Main Street 

 

 

Gardiner, NY 12525 USA 

Stone Ridge, NY 12484 
USA 

 

 

 

 

 

 

(800) 431-8232 

 

 

 

(845) 255-5000 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SP Scientific Service 

 

(877) 548-4666 

 

 

SP Scientific Service Fax

 

(845) 687-0024 

 

 

 

 

 

 

Website

 

http://www.spscientific.com/ 

 

 

 

 

 

 

This Air Flow Device Operator’s Manual contains confidential and proprietary information of SP Scientific 
and may be used only by a recipient designated by and for purposes specified by SP Scientific.   

Reproduction of, dissemination of, modifications to, or the creation of derivative works from this Air Flow 
Device Operator’s Manual, by any means and in any form or manner, is expressly prohibited, except with 
the prior written permission of SP Scientific. Permitted copies of this document must retain all proprietary 
notices contained in the original.   

The information in this document is subject to change without prior notice. Always confirm with SP 
Scientific that you are using the most current version of this document. SP Scientific is free to modify any 
of its products and services, in any manner and at any time, notwithstanding the information contained in 
this document.  

THE CONTENTS OF THIS DOCUMENT SHALL NOT CONSTITUTE ANY WARRANTY OF ANY KIND, 
EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES 
OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE OR GIVE RISE TO ANY 
LIABILITY OF SP SCIENTIFIC, ITS AFFILIATES OR ITS SUPPLIERS.  

The terms and conditions governing the use of this Air Flow Device Operator’s Manual shall consist of 
those set forth in written agreements with SP Scientific. 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for FTS SYSTEMS AD80 & AF6





















Reviews: