2
TABLE OF CONTENTS
1.
Introduction
2.
Table of Contents
3.
Important Safety Instructions
5.
Warnings
6.
Surface and Pad Requirements
7.
Electrical Requirements
8.
Electrical Connections
9.
Component Operations
10.
Selector Switch
11.
Initial Start Up
12.
Changing the Filter Cycle
13.
Troubleshooting
14.
Spa Maintenance
16. Warranty
Warning
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacture's instruction, may cause
interference to radio and television reception. It has been type tested and found to comply with the limits for a class B computing device in accordance with the specifications in
subpart J of Part 15 of the FCC rules, which are designed to provide reasonable protection against such interference in a residential insulation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause interference, which can be determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following measures: reorient the receiving antenna, relocate the receiver with respect to the spa, plug the receiver
into a different outlet so that the receiver and spa are on different branch circuits, if necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet prepared by the federal communications commission helpful: “How to identify and resolve radio-television
interference problems”, this booklet is available from the U.S. Government Printing Office, Washington, DC 202402, stock No. 004-000-00345-4.
TABLE OF CONTENTS
Summary of Contents for AP-4 SYSTEM
Page 1: ......
