Operating Your Massage Chair
Installation Guide
Off
On
Step 7:
Before Operation
A. Plug your chair in by locating the power box and connecting one side
of the cable into Hole A (as shown).
B. Insert plug carefully into approved socket with required voltage.
C. Turn on using remote control.
D. Enjoy your new massage chair!
SPECIAL NOTES AND PRECAUTIONS
ON MAINTENANCE AND DISASSEMBLY
• When choosing a location for your chair, check the clearance by reclining and
extending your chair in all directions. Ensure there are no obstacles such as
furniture, plants, pets, or children. Allow 6 inches of space behind chair for
airflow.
• Monitor your power plug carefully. Routinely clean the plug and cord to avoid
dust buildup, which could pose a fire risk or affect your chair’s operation.
Ensure the cord sits neatly, without knots, kinks, or stretching. Never place
heavy objects over your power cord.
• Your chair should sit at least 4 inches from the wall starting from the backrest
and 12 inches from the leg rest front.
• Before using your chair, check for children and pets. Always check your
surroundings before using the recliner. Do not apply pressure or attempt to
get out of the chair while the leg rest is in motion, as this may cause damage,
which is not covered under warranty. Refer to the remote control guide for
more information regarding proper use and operation.
Operating Your Massage Chair
Turning On Your Chair
1. Insert the power cord into an approved socket.
2. Ensure the power switch is in the “ON” position (located at the
back of the chair).
3. Use the ON/OFF button located at the top of the remote control to
begin operation and cycle through available programs.
Starting and Ending Your Massage Session
1. To begin a massage session, use the remote control to navigate to your
desired settings, air pressure, and speed. Learn more about these options in
the Control Panel Usage Guide.
2. When a massage session ends, the chair will automatically turn off. For
best results, please wait 15–30 minutes before beginning another session.
WARNINGS CONCERNING
OPERATION
•
• If you notice damage to the synthetic leather surface, please discontinue use
and contact
support@SpaDynamix.com
• To reduce risk of injury, only use in a socket with approved voltage.
• Do not stand while using this massage chair. If you need to stand, turn the
massage program “OFF” using your remote control first and wait for the chair
to return an upright position.
• Before using your massage chair, ensure there are no personal belongings
trapped between the gaps of the arm rests, leg rests, and seat frame.
16
15
