Installation Guide
Installation Guide
Step 4:
Assemble the Armrests Air Hoses
A. Locate the air hoses on your armrests and on the seat base, which are
color-coded. Connect each air hose on the armrest to its corresponding air
hose on the seat base.
B. Locate the LED wire on the armrest and the LED wire on the seat base.
Connect them.
NOTE:
Do not squeeze the LED wire or air hoses during installation, as this could
damage the components and affect the operation of your chair.
To disassemble: Unscrew the four bolts that connect the armrest to the seat frame.
Press button on the fixed hold, and lift and pull to release.
Step 5:
Install the Back Cushion and Headrest
Locate the headrest and back cushion (included). Attach the two components to the
backrest frame using zippers and Velcro, respectively.
NOTE:
To ensure effective operation, ensure the bottom rim of the headrest is flush
with your ears before attaching.
Step 6:
Connect Seat Air Tubes
On the seat frame and seat cushions, you’ll notice color-coded air tubes. Connect
these color coded components tightly. For example, connect the gray seat frame
tube with the gray seat cushion tube. Repeat with brown air tubes. Press seat
cushion down firmly on frame to secure Velcro between the seat frame and the
cushion.
Backrest
Headrest
Velcro
Connection
Back cushion
zipper connection
Back cushion
zipper connection
Back cushion
connects to the
seat with Velcro
The Seat Area
Gray Air Tube
Dark Brown Air Tube
Seat Cushion
14
13
