SPA DESIGN MICRODASH LOGGER OPERATING MANUAL
This is the ‘info’ window. If you save the file at this point, you will see this when you open it again. You must
have a file open in order to download data from the logger.
Unplug the download lead and reconnect the dash display. Access the menu system and make sure the ‘Log’ is
set to ‘On’.
After you have logged data, disconnect the dash display and plug in the download lead. Make sure you have the
data file (the one you setup the logger with) open. To download the data, select ‘download’ for from the ‘logger’
menu, or click the ‘download data’ button. A bar graph will show the progress.
When the data has been downloaded, you will be prompted to save it now. Although this is optional, you are
really advised to do this. After this you will be prompted to erase the data. If you wish to be cautious, you can
erase it later if you wish. Don’t forget that flash memory data cannot be overwritten it must be erased first.
The graph wizard
Whenever new data is uploaded, the graph setup wizard will start automatically. The wizard can also be started
any time by selecting ‘graph’ from the ‘view’ menu:
19
