Page 8
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
Rail joining for custom designs:
To adjust your
designs with the rails, use the Rail Couplings to increase
the length of your rail sections.
Connecting rails to arms:
To install the rails, press them
into the arm as shown. You should hear a click when the
rail is locked in place.
Angling the Arms:
Install the arms at the angle of the
incline the rails will travel along.
Railroad stability:
To maintain stability on longer track
segments, attach Rail Clips as needed.
Elevator Exit:
When installing the elevator exit rails, pull
the rails close to the Elevator Helix to ensure the Marble
enters the rollercoaster smoothly.
Smooth rails for efficient travel:
Make sure the rails
connect smoothly and are free of any bumps, twists,
or kinks.
Corner stability:
To provide extra stability on the
Corners, place Shaft Clips directly below the Corners.
Rail and Corner connections:
Cut the rail at a 45° angle
where it meets a Corner. This will help smooth out the
transition as the Marble flies around the track.
ASSEMBLY TIPS & TRICKS
