Page 18
attract dirt.
However, If the chain becomes rusty, then clean it with WD40, dry it off
well and then lubricate it with the chain spray.
(b)
Apply grease to the ball bearings. To do this, you need to disassemble the rear wheel.
Do not use WD40 as this will result in defects.
(c)
Make sure that all parts of the Space Scooter® are fastened tight. The caps under the
tray shelf can get loose by vibrations. Although the Space Scooter® is put together
with the utmost care, we cannot avoid parts getting loose. To ensure screws will stay
tight, you can use a product such as Loctite.
Be sure you have read the instruction manual carefully and understand how the Space
Scooter® works. If the problem you’re still experiencing still exists, please contact the helpdesk
by e-mail:
support@spacescooter.eu
.
All rights reserved.
