Page 7
Setup and unfolding
Tightening the brake handle.
Note:
The brake handle has not been tightened before the product
was packed in the factory; the user should tighten the brake handle
screw before using the scooter. Adjust brake handle to a suitable
position and tighten it with the allen wrench.
Unfolding
1.
Release the folding mechanism by opening the quick release clamp
on the right side of folding mechanism.
2.
Push "Folding" unlock button (A) on the folding mechanism to
unlock and pull the vertical pole upwards until you hear a click.
Turn the steering pole slightly to confirm spring-load lock pin is
locked into the correct position.
3.
Tightening the quick-release clamp at the right side of the folder to
lock the mechanism.
