spaceslide TOWER UNIT 3 DRAWERS 450mm Assembly Instructions Download

Page: 4 / 5

https://www.spaceslide.co.uk/diy-installation-and-information

Call: 0800 9803499

SS_INSTRUC_TU_DR_10.2018_V2.1

Page 4 of 5

(Repeat on all drawer sides).

(Repeat on all drawer fronts).

MAKING THE DRAWERS

Drawer back

Drawer base

Drawer front

Drawer side

1 – Lay drawer side (I) on a flat surface, insert the base (K) into the

groove then hold the back panel (M) in place.

2 – Place the other drawer side (J) over the base and fasten the

back panel (M).

3 – Turn the drawer around and add the drawer front (L) .

(Repeat on all drawers).

Summary of Contents for TOWER UNIT 3 DRAWERS 450mm

Page 2: ...to all shelves Lay panels B C on a flat surface Fit cams dowels to both panels Note B panel shown Page 2 of 5 x4 Insertthescrewsintotheholesshownonbothsides B C 5 PRELIMINARY DRAWING ISSUED BY A SIMMONS ISSUE DATE 18 06 12 QUOTATION PURPOSES ONLY ISSUED DRAWING ISSUED BY A SIMMONS ISSUE DATE 18 06 12 ISSUED TO SUPPLIER x2 FIX THROUGH THESE HOLES HIGHLIGHTED 1 2 3 ...

Page 3: ...es D onto side panel C Attach the other side panel B 8 1 2 x2 Slotinfill G ontothestickysideof thetapeonthedrawerinfillstrip H 1 Insertthecamsintobothinfillpanels G Onthemetalstrip H removetheplasticbackingfromthedouble sidedtapethenstickthe metalstriptothedrawerinfill G 2 Attachdrawerinfillpanelsontothesidepanel C andtightenthecams 6 ...