59
ERROR MESSAGES
Error:
Could not lock code/patch RAM.
These occur of the extended memory needed for the legacy code
could not be allocated or locked. Try using a smaller
SMARTDRV.EXE cache size (i.e., LH C:\WIN95\
SMARTDRV.EXE 1024) or increasing the amount of system RAM.
Error:
Could not allocate code/patch RAM below 4-MB boundary.
This occurs of the extended memory needed for the legacy code
could not be allocated and locked below the 4-megabyte boundary.
Try loading APINIT.COM before SMARTDRV.EXE, minimizing
VDISK, or specifying a smaller cache size for SMARTDRV.EXE
(i.e., LH C:\WIN95\SMARTDRV.EXE 1024).
Error:
Could not execute APLOAD.EXE.
If this happens, the APLOAD.EXE or DOS4GW.EXE file is prob-
ably missing. (APLOAD.EXE is a protected mode application that
needs DOS4GW.EXE to run.) Download and install the latest
AudioPCI™ drivers.
Error:
PCI BIOS detect failed; <PCI BIOS-specific error message>.
Error:
PCI device detect failed; <PCI BIOS-specific error message>.
These will occur if a PCI BIOS was not detected or if the PCI BIOS
cannot locate our card in the system. They are both followed by PCI
BIOS-specific error messages.
Error:
Could not allocate DOS memory.
Could not allocate temporary MS-DOS memory to make VCPI calls.
Error:
Could not install service vectors.
This should not happen. If it does, the user is probably using a very
old or very odd memory manager.
Error:
<Path>\<*.ECW> is not a valid ENSONIQ AudioPCI™ waveset
file.
Select or add a different *.ECW file.
