SPACK Countcam2, Product Manual

Product Manual

Congratulations 

on 

the 

purchase 

of 

COUNTcam2, 

the 

traffic 

counting 

industry’s 

trusted

video 

recording 

system. 

The 

COUNTcam2 

Video 

Recording 

System 

allows 

you 

to 

easily

collect video data to conduct traffic analysis such as turning movement counts.

COUNTcam2 uses state of the art technology to allow you to wirelessly set up your recording.

Information 

on 

how 

start 

using 

the 

COUNTcam2, 

proper 

equipment 

installation, 

data

retrieval, and using the booster pack for extended studies is covered in this manual.

1. Getting Started

Charging the COUNTcam2

The 

COUNTcam2 

will

need 

to 

be 

charged

before 

use. 

The 

charging

port 

of 

the 

COUNTcam2

is 

located 

on 

the 

bottom

of 

the 

device. 

To 

plug

in 

the 

charger, 

align 

the

three pin connector of the

charger with the alignment

nub 

of 

the 

charging

port 

and 

gently 

insert

the 

charger 

connector.

After 

alignment, 

use 

the

locking 

screw 

to 

secure

the 

connection. 

The

green 

charging 

indicator

on 

the 

COUNTcam2

will 

be 

illuminated 

when

COUNTcam2 is charging.

The charging indicator will

turn 

off 

when 

charging

is 

complete. 

It 

takes

approximately 

15 

hours

to 

completely 

charge 

the

COUNTcam2.

Download the App

Download the

COUNTCA

M

 App

from the Google

Play Store or

from the Apple

App Store to a

mobile device

(i.e. phone or

tablet).  This is

a  proprietary

app designed to control the COUNTcam2. You will

need the COUNTCAM app to  initiate recordingon 

the COUNTcam2. Once the app is installed,you will 

not need access to the Internet to use the

COUNTcam2.

Connecting to the COUNTcam2

The 

COUNTcam2 

uses 

a 

local 

wireless 

network

(Wi-Fi) to communicate with your mobile device.

• 

Press 

the 

power 

button 

on 

the 

front 

of 

the

COUNTcam2 

for 

1 

second. 

The 

COUNTcam2 

will 

broadcast 

its 

wireless 

network 

within 

10seconds of powering up.

• 

Go 

to 

your 

mobile 

device’s 

Wi-Fi 

settings 

and

connect to the COUNTcam2 network.  The

network 

name 

prefix 

is 

COUNTCAM followed

by the 

device’s ID. The default password is 

“12345678”which can be changed later.

1

Tip:

Make sure to charge your COUNTcam2 

after

 every use. If the COUNTcam2 is not being 

used

 frequently, a charge at least every 4 to 6 

months

 is recommended.

Note: You must be in range (up to 20 feet) of the

COUNTcam2 Wi-Fi network to ensure connection.