Filling of water
R
ECOMMENDED WATER LEVEL
Water consumption and energy!
Filling is generally done with a garden hose connected to the water mains. If another water source is used,
take special consideration regarding the potential for bacteria. Read the instructions on water hygiene and
the use of chemicals.
Remember that the water level will rise by approx. 5 cm when an average-sized person sits in the Hot Tub.
This is equivalent to 80 liters of water. The water level should be 20 cm below the edge when empty. The
total amount of water to heat up is subsequently reduced by ca. 320 liters. If the spa is completely filled,
this amount of water will flood over the edges when the users sit down.
During filling of water a garden hose or similar can be used. Fill to the level that the pictures show.
NOTE!
During the filling, valves 5 & 6 have to be closed, page 5. See page 4 to how they are maneuvered.
S
UCTION IS ADJUSTED BY MOVING THE REGULATOR UP OR DOWN
. M
OVE DOWNWARDS TO DECREASE SUCTION
.
6
