Maintenance
Euro Kitchen Appliances Inc. 7272 Buller Ave, Burnaby BC www.KitchenHoods.ca
Cleaning/Replacing Filters:
The filter mesh is made of high-density stainless steel. Please do not use the corrosive detergent on it. Keeping
this filter clean will keep the appliance running correctly. Please strictly follow the guidelines below.
METHOD 1: Put the mesh into 40-50
°
C clean water, add detergent, and soak for 2-3 minutes. Wear gloves
and clean with a soft brush. Please do not apply excessive pressure, or it will be damaged.
METHOD 2: They could be put into a dishwasher, only if the temperature is set at around 60
°
C.
• Should filters wear out due to age and prolonged use, replace the original size number:
Replacing the light bulb:
• This range hood uses halogen bulb: 20W 12V.
• Make sure the range hood is unplugged or turn OFF breaker.
1. Rotate the ring counter clockwise to remove cover.
2. Gently pull defective bulb straight out and discard.
3. Wear a cotton glove or use a cloth to handle the replacement
bulb (DO NOT handle with bare fingers as this may shorten the life of the bulb).
Push gently but securely into light socket. NOTE: DO NOT push too hard as bulb
“legs” may break off.
4. Replace light cover.
• Turn ON breaker and range hood to test for operation.