Page 13
Range Hood Operations
(Continued)
Control Panel Layout and Buttons Configurations:
Activating Light Function:
• Press
Light
button once to turn on the lights, and once again to turn off the lights.
CAUTION: DO NOT touch the lights until switched OFF and cooled.
Activating Power-Off Delay Function:
• While the range hood is on and the blower is running in normal mode, press Power-Off Delay button
to activate delay off timer and “Power-Off Delay” icon will appear in LCD panel. Adjust to desired period of
delay off timer by pressing Increase or Decrease button (minimum 1 minute to maximum 15 minutes). Timer
begins to countdown immediately, when it reaches 0, the blower will shut off.
Activating Clock Function:
• While the range hood is off, press Power-off Delay button for 2 seconds to enter the clock setting
mode, press Increase or Decrease button to set the Hour. Press the Power-off Delay button again to set the Min.
Remote Control Sensor:
• Remote control sensor receives infrared (IR) signal from the remote control. The maximum distance
for IR data transmission is 3 meter (10 ft.) and requires direct line of sight. The transmission distance may vary
depending on temperature and remote control battery condition.
Remote Control
Sensor
Power-Off
Delay
Light
LCD Panel
Decrease
Increase
Auto Function
Note: Light settings are independent from other settings (including power-off delay) and lights have to be
manually turned on or off.
Summary of Contents for PS13
Page 2: ......
Page 19: ...Page 17 Overall PS61 PS63 Overall PS65 ...
Page 21: ...Page 19 Circuit Diagram ...
