background image

Page 20

Page 21

Your Notes

Carefully inspect all items for damages before accepting delivery. note any damages on the freight bill or 

express receipt. request name and signature of the carrier’s agent and keep copy to support your claim. Upon 

acceptance of items, owner assumes responsibility for its safe arrival. Report damages to the carrier and file 

a claim immediately. Failure to do so may result in the denial of your claim. The carrier will furnish you with 

necessary forms for filing a claim.

Damages caused during transit are not covered under our warranty. Please contact us to file an insurance claim.

Please inspect contents of package(s) carefully upon receiving! We must be notified of any damages and/or 

missing parts within five (5) days upon your receipt of package(s). Claims will not be accepted after five (5) 

days. NOTE: Items were thoroughly tested and carefully packed in our factory before shipping.

Products must be returned in good working condition with ALL original parts and documentation packed in 

ALL original cartons, fillers and shipping cartons. A restocking fee of 15% will be charged for all approved 

return(s). Exchanges or returns may not be accepted if any packaging is missing.

Make sure to inspect the hood for damages and defects before installation. Appearance flaws of the hood found 

after installation and not affecting hood performance is not covered under our warranty for returns or exchang

-

es. Service visits not covered under warranty will carry a service charge.

Before Installation: Return for exchange or refund (please see above for acceptable returns).

After Installation: 

NO

 exchange or refund.

If you need any assistance, please contact your local reseller. Please have your order number and model of the 

range hood ready. This information will help them better respond to your request.
If you need replacement parts, we recommend that you only use genuine parts. Our accessories and parts are 

engineered and designed specifically for this series of range hood, each is rigorously tested assuring the utmost 

in durability and reliability, providing a factory match, factory-installed appearance and functionality tailored to 

each individual range hood model.

Contact Us

Disclaimer

The  information  in  this  document  is  subject  to  change  without  notice,  please  contact  your  local  reseller  for  updated  details.

Summary of Contents for PS19














Reviews: