Page 14
Measurements and Diagrams
(Continued)
PSM
DIMMENSIONS
Page 15
Troubleshooting
1. If the range hood or halogen light does not operate
after installation:
•
Check if the range hood has been plugged in, make
sure that all power has been turned back ON, fused
not blown and all electrical wiring are properly con
-
nected.
•
Swap out light assembly to working ones to deter
-
mine whether it is caused by defective bulbs. See
Replacing the light bulbs
on Page 19.
2. The range hood vibrates when the blower is on:
•
The range hood might not have been secured prop
-
erly on to the ceiling or wall. The duct is smaller
then recommended. Check with your installer.
3. The blower or fan seems weak:
•
Check that the duct size used is at least 8”in diam
-
eter . Range hood WILL NOT function efficiently
with smaller duct size. For example: using 6” duct
when 8” is recomended.
•
Check if duct is clogged or if damper unit (half-cir
-
cular flapper) is installed correctly . Rusty damper
also can cause restriction to the air flow.
4. The lights work but the blower is not spinning at all,
is stuck or is rattling.
•
The blower might be jammed or scraping the bot
-
tom due to shipping damage. Please contact us im
-
mediately.
5.
The hood is not venting out properly:
•
Make sure the distance between the stove top and
the bottom of the hood is within* 28” and 36” in
distance. *
Due to different ceiling height configura
-
tions, recommended height may not be applicable
.
•
Reduce the number of elbows and length of duct
work. Check if all joints are properly connected,
sealed, and taped.
•
Make sure the power is on high speed for heavy
cooking.
NOTE:
For all other inquiries, please contact your local reseller.
