TECHNICAL SUPPORT - tel. +48 71 31 59 068
The producer is not responsible for damage resulting from in-
correct installation or operation of the device.
Thank you for purchasing our products. Please read the instruction
manual and maintenance guide before use.
Technical data
Supply voltage
9V DC (1 x battery included)
Power consumption
5-10 µA
Response time
≤ 7 seconds
Alarm volume
85dB / 3m
Dimension
Ø85 mm x 30 mm
Range of working temperatures
-1°C ÷ +50°C
Water leak alarm SZ\1B is designed for an early detection of water in the
places exposed to water leak, e.g. cellars, garages as well as the rooms
with devices like dishwasher, washing machine, air conditioner, etc. The
manufacturer cannot be held liable for any damage caused by the in-
correct installation or handling of the device.
IN THE KIT
9V DC battery 1x
Mounting screws 2x
INSTALLATION
1.
Open the battery cover using a coin or a screwdriver.
2.
Insert one 9 V battery. Remember to keep the correct polarity.
3.
Close the device with a cover. Check if the seal is positioned properly.
4.
The device is now ready. Just place it on the floor or other location
potentially exposed to water leak. When water is detected, the detec-
tor will trigger the sound alarm. Do not place the detector on metal
or conductive surfaces; this may trigger a false alarm.
Sensors
