background image

12 

 

GEAR OIL METER 

NOTE: Oil Meter Indicator is only available for SP-A80HI, SP-A80I, 

SP-B80HI and SP-B80I.

 

Use the gear oil to lubricate the mixer and to prolong the life of 

the mixer. Before using the mixer, please check the gear oil meter. 

When the indicator of gear oil meter is above the half of the red circle, 

the gear oil is full. 

Please re fill the gear oil when the indicator is 

below the red circle.

 

GEAR OIL RENEWAL

 

CAUTION:

 Please use Mobil lubricant “UBE HD 85W-140” to refill the gearbox of model SP-A80HI, 

SP-A80I, SP-B80HI and SP-B80I.

 

Please unscrew and leak the oil from the indicated oil-leaking hole. After finishing the leaking, re-screw 

back tightly with the anti-leaking coat on the screw. Fill the gear oil to the indicated re-fill oil hole. We 

recommended that this servicing or maintenance work must be carried out by trained technicians from a 

SPAR appointed distributor. 

GEARBOX LUBRICANT 

    In terms of the rest model from SP-100A to SP-60HA, please refill the lubricant inside the gearbox every 5 

years. We recommended that this servicing or maintenance work must be carried out by trained technicians 

from a SPAR appointed distributor. 

CAUTION:

 Please use either Mobil lubricant “XHP 222” or Brugarolas “GRASA AGUILA PLEX 2-BOLSA” to 

refill the gearbox of model SP-100A, SP-200A, SP-30HA, SP-40HA and SP-60HA. 

PLANETARY UNIT LUBRICANT 

Please add 

only

 2 pumps of grease to the planetary grease fitting once a year. In case there is a 

strange noise coming from the planetary unit, please reapply grease to the planetary unit by using the 

grease gun. We recommended that this servicing or maintenance work must be carried out by trained 

technicians from a SPAR appointed distributor. 

CAUTION:

 Please use TACBECON grease “GL-210” to lubricate the planetary unit.

 

 

Limited Warranty 

GUARANTEE 

SPAR provides one year guarantee, either the date of dispatch from our factory, or the date of 

purchase from one of our approved distributors. We will replace any defected parts resulted from faulty 

design, material or workmanship, provided that no alteration, addition or repair has been carried out 

except by an authorized Service Agent and provided that such defective part(s) be returned to the 

Company’s nearest authorized representative, postage paid. 

Troubleshooting 

 

FAULT FINDING 

FAULT 

CHECK 

POSSIBLE REASON AND ACTION REQUIRED 

Summary of Contents for HI Series


















Reviews: