1/22/2018
LilyPad ProtoSnap Plus Hookup Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/lilypad-protosnap-plus-hookup-guide?_ga=2.234157401.659504291.1516640116-204410570.1509632255
21/23
It is safe to leave a LiPo battery attached to the board permanently, even with USB power applied. The battery will not
be overcharged.
Notes on Washing LilyPad Projects
LilyPad projects are hand-washable, but always remove the battery before washing your project and air-dry
your project for several days before replacing the battery.
Removing the LiPo Battery
The battery connector can be tight; to remove a battery never pull on the wires. Use a pair of needle nose pliers or
cutters to gently hold pull the plug out of the connector.
Tip: there are two small "nubs" on the top of the plastic battery connector that can be shaved off with a hobby
knife to make the battery easier to remove.
Always turn the LilyPad off before inserting or removing a battery.