1/22/2018
LilyPad ProtoSnap Plus Hookup Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/lilypad-protosnap-plus-hookup-guide?_ga=2.234157401.659504291.1516640116-204410570.1509632255
3/23
Sensor (S)
LilyPad
Buzzer (+)
A3
A buzzer that create tones controlled
by LilyPad USB Plus.
LilyPad
Button
A4
LilyPad USB Plus receives button
press input.
2x LilyPad Y
LEDs (+)
A5
A pair of yellow LEDs controlled by
LilyPad USB Plus.
2x LilyPad
R LEDs (+)
~6
A pair of red LEDs controlled by
LilyPad USB Plus.
2x LilyPad
G LEDs (+)
~A7
A pair of green LEDs controlled by
LilyPad USB Plus.
2x LilyPad B
LEDs (+)
~A8
A pair of blue LEDs controlled by
LilyPad USB Plus.
LilyPad
Switch
A9
LilyPad USB Plus receives switch
state (on/off) input to change modes.
Expansion
Port A9
A9
Clippable pads to connect another
LilyPad piece to. Shares connection
with the LilyPad Switch.
Expansion
Port (+)
(+)
Clippable pads connected to LilyPad
USB Plus's power (+) sew tab.
Expansion
Port
~10/SCL
~10/SCL
Clippable pads connected to LilyPad
USB Plus's sew tab 10. This can be
used to connect to a I2C clock pin.
Expansion
Port 11/SDA
11/SDA
Clippable pads connected to LilyPad
USB Plus's sew tab 11. This can be
used to connect to a I2C data pin.
Expansion
Port (-)
(-)
Clippable pads connected to LilyPad
USB Plus's ground (-) sew tab.
All
components
(-)
(-)
All components share a common
ground connection back to the
LilyPad USB Plus.
Powering the LilyPad ProtoSnap Plus
The LilyPad ProtoSnap Plus can be powered in two ways:
