Left Line Follower
Left
Center Line Follower
Right
Right Line Follower
Right
Left Motor wires (red and black)
Left
Right Motor wires (red and black)
Right
Left Wheel Encoder*
Left
Right Wheel Encoder*
Right
* Indicates parts included in the SIK for RedBot
Line up the Top Chassis Plate on top of all the struts, and carefully snap the
Top Chassis Plate assembly onto the side struts and motor mounts. Press
gently above each side strut individually until they each snap into place. If
you have the Bumpers installed, make sure the boards are between the top
and bottom plates.
If you need to remove the plate to change anything, gently pull upward on
each side strut individually. Do not attempt to use pliers or hand tools, or
you may end up snapping the plastic clip.