background image

1/2

7

6

This manual contains important information on product safety, set-up, 
operation, and maintenance. For optimum performance and safety, 
read this manual carefully before using this product. Please keep this 
manual in a safe place for future reference.

IMPORTANT SAFETY INFORMATION

• When using electrical appliances, basic precautions should always be 

followed to reduce the risk of damage, fire, electric shock, personal 
injury or property damage.

• Only plug this product’s power cord into a compatible power outlet. 

NOTE: This product is compatible with any AC voltage (100 – 240 V ).

• Do not overload wall outlets, extension cords, or power strips 

beyond their capacity. This could cause a circuit breaker trip, 
insufficient voltage supply, or an electrical fire.

• To avoid electric shock, never operate the compressor outdoors 

when raining, in wet conditions, or near open water sources.

• Always place the compressor on a stable and flat surface.
• Always remain in attendance when the compressor is in operation.
• Never place objects against, or on top of, the compressor. Operate 

the compressor in an open area without any obstructions that would 
restrict the flow of fresh air into the compressor.

• Exceeding the pressure rating of pneumatic tools, such as airbrushes, 

spray guns, or air operated devices, could damage the tool and could 
also cause serious personal injury. Never exceed the maximum 
allowable pressure rating recommended by your pneumatic tool’s 
manufacturer.

• Verify that the compressor is operating properly before using the 

compressor for human applications (such as the application of 
cosmetics).

• Do not insert any foreign objects into the openings of the 

compressor.

• Do not disassemble the compressor or attempt to modify the 

compressor in any way.

SPECIFICATIONS

STYLE # DC-25XR COMPRESSOR with Smart Stop function
100~240V
Airflow: 12 lpm
Preset max pressure: 30 psi
Pressure adjustable
Weight: 0.9 kg
Size: L16 x W9 x H9.5 cm
Metal case

* Air flow range indicated shows average values over different voltages 

and frequencies. There will be tolerance for each unit and current 
fluctuation also affects actual airflow performance.

PRODUCT OVERVIEW

FRONT VIEW

REAR VIEW

INCLUDED ACCESSORIES

PARTS LIST

1

Pressure adjustment knob

2

Air Outlet

3

Detachable Airbrush Holder
DC Power Jack

4
5

On/Off Button

6

PU Hose

7

AC/DC adaptor

Copyright © 2019 ANEST IWATA SPARMAX Co., Ltd. 

1

2

3

5

4

DC-25XR
User’s Manual

Summary of Contents for DC-25XR

Page 1: ...ießlich in offenen Umgebungen in denen keinerlei Hindernisse den Frischluftstrom in den Kompressor beeinträchtigen können Ein Überschreiten des Maximaldrucks pneumatischer Werkzeuge darunter Airbrushes Spritzpistolen oder druckluftbetriebene Geräte kann zu Schäden am Werkzeug und schweren Verletzungen führen Überschreiten Sie daher niemals den maximal zulässigen Druck der vom Hersteller Ihres pneu...

Page 2: ...ark erwärmt sein 6 Es wird empfohlen dass der Kompressor nicht länger als 30 Minuten durchgehend in Betrieb ist Schalten Sie den Kompressor nach 30 Minuten Dauerbetrieb entweder mit der Ein Aus Taste aus oder nehmen Sie ihn vorübergehend außer Betrieb indem Sie die Spritzpistole in die Halterung legen Lassen Sie das Gerät 10 bis 15 Minuten abkühlen bevor Sie es erneut einschalten oder in Betrieb n...

Page 3: ...out any obstructions that would restrict the flow of fresh air into the compressor Exceeding the pressure rating of pneumatic tools such as airbrushes spray guns or air operated devices could damage the tool and could also cause serious personal injury Never exceed the maximum allowable pressure rating recommended by your pneumatic tool s manufacturer Verify that the compressor is operating proper...

Page 4: ...s after operation 6 It is recommended that the compressor run continuously for no more than 30 minutes After 30 minutes of continuous operation use the On Off Button to turn off the unit or place the airbrush into the holder to pause the compressor Allow the unit to cool for 10 to 15 minutes before turning the compressor back on 7 After each use make sure the unit is turned off and unplugged Also ...

Reviews: