Ethernet Adaptor 01-103
Sparr Electronics Ltd., Bangalore
9
Please make a note that you may not be able to PING the Device as of now until you
set / store an IP Number permanently
5.4. Programming through WEB BROWSER
EAD can also be programmed through the web browser using http protocol. All the EAD
setup parameters are not programmable through the web browser. If you do not know the
IP Number of the EAD you can press the „LOAD DEFAULT‟ switch for 10 seconds
continuously to load EAD Default parameter values and then use IP number
192.168.0.254 in the browser. We recommend you to use internet Explorer 6.0 and above
as browser.
5.4.1. Starting up.
In order to program EAD from web browser, open a new web browser window in your
computer. Enter „http://‟ and the correct IP Address in the browser address field and
press the „Enter‟ key. Enter the Password when prompted. Default password is 77277.
Change the parameters as per your choice. For detailed description on parameters of
EAD, see later section.
For example: -
If the IP Number of the EAD is 192.168.0.254 then you have to enter http://192.168.0.254
in the web browser address field and press „Enter‟ Key.
After changing the parameter value in any of the browsed page, you need to click on
„Update‟ button in the same page and finally need to click on „Save & Reboot‟ button
from any page. If u wants to load default values click on „Load default‟ from any page
and then click on save & Reboot.
Figure. 9. EAD01-103 LOG-IN page in browser
Default login password is 77277. Whenever click on login it will show Home Page
(figure.10).This page displays EAD MAC Address, Firmware version, Product Model and
Boot loader details.
