Ethernet Adaptor 01-103
Sparr Electronics Ltd., Bangalore
2
1.2.2. Internet Protocol (IP) Address
To identify an individual computer/device on the IP network, the device must have a
unique IP address in a Network. The current version of Internet Protocol uses a four-byte
number, expressed in dotted decimal notation.
Sample IP Address
192.168.0.250
1.2.3. Port Number
Every TCP connection is established using a destination IP address and a Port number.
For example Telnet application commonly uses port number 23 of contacted IP number.
The EAD‟s Serial channel (port) can be associated with a specific TCP or UDP Port
number. E.g. Port number 7727 (as source port number)
2
EAD Kit Contains
1.
Ethernet Adaptor
2.
User Guide
3.
Instructions / Pin out diagram - Based on Model
3
Product Description
This section describes various components of EAD01-103 and explains how to install it
on a basic network
3.1. Serial Interface
The EAD01-103 has a 9- pin RS 232 Male Serial connector in the Metal Box (MB) unit
or with Open Wire / with connectors for PCB Board Level Product (depending on the
model), which can be connected to any Serial device.
3.2. Network Interface
EAD01-103 has one RJ45 Female 10 Base-T
or 100 Base-TX Connector
Ethernet port that
supports up to 100 Mbps speed for connection to Local Area Network (LAN) through
Hub or Switch. You can also use a Cross Cable to connect to PC‟s LAN Card directly.
