Sparta D-BURST M8TB Owner'S Handbook Manual Download

Page: 20 / 230

English –

–

<DU vx.x.x.x>:

Drive unit software version. This menu

item is displayed only when the on-board computer is in
the holder.

–

<DU SN xxxxxxx/xxx>:

Drive unit serial number. This

menu item is displayed only when the on-board computer
is in the holder.

–

<DU PN xxxxxxxxxx>:

Drive unit part number. This menu

item is displayed only when the on-board computer is in
the holder and the drive unit provides a part number.

–

<Service MM/YYYY>:

This menu item is displayed if the

bicycle manufacturer has set a fixed service date.

–

<Serv. xx km/mi>:

This menu item is displayed if the bi-

cycle manufacturer has set a service date after travelling a
certain distance.

–

<Bat. vx.x.x.x>:

Battery software version. This menu

item is displayed only when the on-board computer is in
the holder. When using two batteries, the software ver-
sions of both batteries are displayed successively.

–

<Bat. PN xxxxxxxxxx>:

eBike battery part number. This

menu item is displayed only when the on-board computer
is in the holder and the eBike battery provides a part num-
ber. When using two batteries, the software versions of
both batteries are displayed successively.

–

<Cha. vx.x.x.x>:

Software version of the charger used to

charge the eBike battery. This is displayed only if the
charger provides the software version.

– If the eBike is equipped with ABS, the software version,

serial number and part number of the ABS are also dis-
played.

Error code indication

The components of the eBike system are continuously and
automatically monitored. If an error is detected, the corres-
ponding error code will appear on the text indicator

(d)

Press any button on the on-board computer

(3)

or on the op-

erating unit

(9)

to return to the standard indication.

The drive may be automatically shut down, depending on the
type of error. However, if you wish to continue cycling, you
will always be able to do so without assistance from the
drive. Before undertaking any other journeys, the eBike
should be checked.

Have all repairs performed only by an authorised bike
dealer.

Code

Cause

Corrective measures

410

One or more buttons of the on-board com-
puter are disabled.

Check whether any buttons are stuck, e.g. as a result of dirt finding
its way in. Clean the buttons if need be.

414

Operating unit connection problem

Have the connections checked

418

One or more buttons on the operating unit
are disabled.

Check whether any buttons are stuck, e.g. as a result of dirt finding
its way in. Clean the buttons if need be.

419

Configuration error

Restart the system. If the problem persists, contact your Bosch
eBike dealer.

422

Drive unit connection problem

Have the connections checked

423

eBike battery connection problem

Have the connections checked

424

Communication problem between com-
ponents

Have the connections checked

426

Internal time-out error

Restart the system. If the problem persists, contact your Bosch
eBike dealer. With this error, it is not possible to bring up the wheel
circumference in the basic settings menu or to adjust it.

430

Internal battery of the on-board computer
is flat (does not apply to BUI350)

Charge the on-board computer (in the holder or via the USB port)

431

Software version error

Restart the system. If the problem persists, contact your Bosch
eBike dealer.

440

Internal drive unit fault

Restart the system. If the problem persists, contact your Bosch
eBike dealer.

450

Internal software error

Restart the system. If the problem persists, contact your Bosch
eBike dealer.