background image

 

 

 

INSTRUCTIONS FOR USE 

SAFETY INSTRUCTIONS 

WARNING

! 

1.

 

Please keep this instruction sheet safely for future reference. 

2. Please do not modify the product or the assembly details in any way. Modifications will affect 

the structural integrity and replacement parts will be at the buyer’s expense. Inappropriate use or 

faulty application of the product are explicitly forbidden and absolve the manufacturer of all 

liability. This product needs to be mounted by an adult before use. 

3. The use of the item is allowed only under continuous supervision by an adult. The product can 

bear a maximum load of 150 kg. The product is not suitable for children under 36 months, due to 

a lack of extra safety precautions and taking into account the limited mental capacities of 

toddlers. 

4. This product meets all security aspects of the European standard EN71-1, EN71-2, EN71-3 

and EN 71-8.It is only suitable for family domestic use, both indoors and outdoors. 

5. When installing the product, ensure that the play system or other construction can support the 

weight (minimum 200 kg) and that there is no risk of entrapment. 

6. The product should be at a distance of at least 2 m from all other installations e.g. fences, 

branches, clothes-line, … 

7. In this safety area no hard, angular or pointed objects should be present. The surface 

underneath the product should be flat and shock absorbing. The product must not be placed on 

asphalt, concrete or any other hard surface. We advise the removal and storage of all accessories 

during the winter because the characteristics of the soil (when frozen) are not suitable for safe 

play. 

8. The distance between the suspension points along the crossbeam equals or is more than the 

distance between the junction points of the product, plus 4% of the distance between the ground 

and beam. See FIG I. 

9. The minimum distance from the bottom of the swing seat to the ground surface shall not be 

less than 35 cm. The minimum lateral free space should be 45 cm. 

10. Specific instructions for adjusting the rope length : see FIG II. Ensure that the product hangs 

horizontal after adjustment of the ropes. 

11. Please ensure that the crossbeam is never higher than 2.5 m. Please make sure that children 

do not climb the product to reach the top beam. 

12. To avoid that the swing is heating up, do not place it facing the sun. In warm weather, check 

that the seating surface is not too hot. 

13. All pieces should be checked regularly. For replacement material and expansion of the 

playground equipment please contact the supplier. Consequently safety will be guaranteed. 

14. This product can only be used in combination with sufficiently strong swing hooks with a 

nylon bearing. Only in this case the safety can be ensured. It is explicitly forbidden to use the 

metal rings on a suspension system without a hinged element. 

Summary of Contents for Boat Nest Swing









Reviews: