Following is how to disassemble the swing:
Open the velcro flaps and push the shock absorbing foam to the side. Press down the button to pull
the tubes apart.
INSPECTION AND MAINTENANCE
The frequency of inspection and maintenance will vary with the type of equipment or materials
used or other factors (e.g. heavy use, levels of vandalism, coastal location, air pollution, age of
equipment, ...).
Special attention should be given to the swing hooks, rings, eights, plastic welds and ropes.
Moving metal parts must be oiled regularly.
Routine visual inspection (weekly to monthly)
- Always check that the bolts and nuts are securely fastened.
- Check the shock absorbing surface for objects that don’t belong there.
- Check for missing parts
- Check the equipment ground clearances.
