The next stage is to attach the bar to the fork.
Step 1:
Step 2:
Ensure the back of the clamp is in line with the slot in the back of the bar stem, this allows the clamp to pinch evenly on the bars. Slide the bar
Step 3:
Make sure the front wheel is straight to the deck with the fork pointing forwards. Now holding the wheel still, align the bars so they are a right
angle to the deck/wheel. Keeping everything straight, tighten the bottom clamp bolt up slightly so that the bars keep their position on the fork stem.
Step 4:
Working your way up the bolts tighten them a bit at a time keeping the pressure even. Once you get to the top clamp bolt go back to the bottom
bolt and start again. Keep doing this until the bars are completely secure.
Always check the bars are tight before use by securing the front wheel and trying to turn the bar.
Step 3
Step 2
Step 4
top tip!
Step 1
Make sure the bar is completely pushed down onto the fork tube for maximum internal strength!
