Î
Press
ENT
Î
Î
Press
ENT
Î
Î
Press
ENT
to confirm or press to
ESC
cancel
Î
11.
Setup
– This command contains options to configure the duplicator system.
1.
Power On Time:
Set the amount of time the duplicator controller counts down before initializing the
system. The default is 15 seconds. The time can be set from 5 to 99 seconds in 1-second
increments (5,6,7….97,98,99).
Î
Press
ENT
Î
Î
i
or
j
to select seconds and
press ENT to confirm
2.
Auto Start Time:
Set the amount of time before the duplicator will automatically start the selected
command ranging from OFF (no auto start) to 99 seconds in 1-second increments (1, 2, 3….97,
98, 99).
Î
Press
ENT
Î
Î
i
or
j
to select seconds and
press ENT to confirm
3.
Start-up Menu:
Sets the command to be displayed first when the duplicator is powered on and
initialized. All primary commands are available to be set for Start-up: Copy, Test, Copy & Verify,
Copy & Compare, etc.
Î
Press
ENT
Î
Î
i
or
j
to select function and
press ENT to confirm
4.
Display Mode:
Changes the display readout during the performance of various commands.
The “Basic” mode displays a progress bar, along with the amount of total data in MB on the master
DVD (or in time for the master CD). The “Expert” mode displayed the percentage of the process
completed, the amount of data transferred and the total amount of data on the master disc.
Î
Press
ENT
Î
Î
i
or
j
to select mode and
press ENT to confirm
5.
Button Beep:
Turns the audio signal (a beeping sound) ON or OFF for pressing of the buttons.
Î
Press
ENT
Î
Î
i
or
j
to select mode and
press ENT to confirm
6.
Skip Read Error:
Allows the duplicator to skip uncorrectable read errors on the master DVD or CD.
This feature can be turned ON or OFF.
11
