Page 3
Technical Data
NOTE:
The correct root cutter model must be selected for proper operation.
OPERATING PRESSURES ------
2000 PSI
FLOW RATE REQUIRED ---------
35 - 60 GPM
HOSE FITTING REQUIRED -----
3/4” or 1” hose
WEIGHT -------------------------------
19 lbs.
PIPE SIZES ---------------------------
6” to 20”
INCLUDED SKIDS SIZES --------
6”, 8”, 10”, 12”, and 15”
Do not start root cutter unless it is contained inside the drain line! Severe injury will result
from contact with cutter blades.
—
Drain and sewer cleaning can be dangerous. Always read the safety precautions and operators
manual before using the equipment.
—
When operating any high velocity water jetter with root cutter, always wear safety goggles, rubber
boots, rubber gloves, and rain coat. A full face shield is recommended.
—
Insure that the hose and root cutter has been placed in the pipe a minimum of 3’ before engaging
the water pressure to prevent the root cutter form coming out of the pipe and causing injury.
—
Always shut the water pressure off before pulling the root cutter out of the pipe. Mark the hose a
minimum of 3’ from the root cutter to insure the hose is not accidentally pulled out of the pipe while
still under pressure. Shut off the water pressure when the hose mark is encountered.
“California Prop. 65: This product may contain an extremely small amount of lead in the coating. Lead
is a material known to the State of California to cause cancer or reproductive toxicity.”
Warnings
