GB
13
GB
11. Close the housing cover of the fireplace furniture, ensure that the cover
does not project into the flames but remains a uniform distance from the
burner channel. Then insert the protective panes.
12. Insert the grip stick to grip the cover plate and lift it off.
13. Wet the burner mat with fuel using the bottle which has just been filled.
14. Put the bottle to one side.
15. Wait approx. 2 minutes before igniting the fire to allow the wick to be
fully saturated with ethanol.
16. Ignite the fire on the burner mat and step back from the flames. It may
take a few minutes until uniform flames appear.
Should you ever pour in too much fuel and cause the burner to overflow,
the ethanol collects in the safety container. Empty this immediately and
before lighting the burner. Clean the surface of the burner until it is dry and
completely free of ethanol.
3.5 REFILLING THE BURNER
The burner must NOT be filled when warm or alight and must NOT be filled
via the burner channel!
DANGER TO LIFE!
Minimum waiting time between extinguishing and refilling the burner = 1
hour!
Please also leave the protective panes which may still be hot on the device
during this time!
Risk of burns!
The burners are designed for the fuel to be burnt until all gone. If you only
wish to enjoy the flames for a short period of time, use a correspondingly
smaller amount of fuel. If you wish to take the burner out of operation
prematurely, place the cover on the burner with the aid of the grip stick.
Proceed as follows to refill:
1. Ensure that the air supply is sufficient.
2. Make sure that the burner has gone out and has cooled down fully
(minimum waiting time after being extinguished = 1 hour).
