background image

GB

 24

5.9 LIABILITY

Damages and claims for compensation which are not the result of deliv-
ery of a defective appliance from Spartherm Feuerungstechnik GmbH are 
excluded and are not part of this warranty promise. The above shall not 
include claims made in respect of statutory legal requirements.

5.10 CLOSING REMARKS

In addition to these warranty conditions and our commitment to them, our 
dealers and contractual partners are available to advise and assist you. We 
expressly recommend that our fireplaces and stoves are regularly inspected 
by a stove fitter or specialist dealer.

•  Lack of maintenance
•  Incorrect set-up/installation of the appliance
•  Failure to comply with installation instructions and operating instructions
•  Technical modifications made to the appliance by staff from other 

companies

5.6  RECTIFICATION OF DEFECTS / MAINTENANCE

Independent of any statutory provisions acknowledged as taking precedence 
over the terms of this warranty, all necessary repair works demonstrably 
resulting from material or manufacturing defects shall be carried out free-
of-charge in the context of this warranty and shall not invalidate the remain-
ing provisions of the warranty. 

Within the scope of this warranty promise, Spartherm Feuerungstechnik 
GmbH reserves the right to either remedy the fault or replace the appliance 
free of charge. The elimination of defects shall take precedence. The terms 
of this warranty shall explicitly not extend to any damage or compensation 
not covered by statutory provisions.

5.7 EXTENSION TO THE WARRANTY PERIOD

The warranty period for this replaced device/the components shall be 
extended, where claims made in respect of these warranty provisions result 
in the repair or replacement of defective equipment.

5.8 SPARE PARTS

Only the manufacturer's own components, or replacement parts recom-
mended and approved by the manufacturer, shall be used for appliance 
servicing and repair.

Summary of Contents for Ebios-Fire Quadra Inside Automatic I SL





























Reviews: