19
DOOR ASSEMBLY - SPARE PARTS.
ROBAX 4MM CERAMIC GLASS.
USE ONLY AS PER MANUFACTURERS STANDARD AND SPARE PARTS.
Caution:
Never close the air lever of the air control com-
pletely or before the fire has started to burn
efficiently as it will create smoke and the fire would be
inefficient and the energy from the wood is wasted.The
door should be closed during operation. Please follow
the instructions in the manual to get the best results
from your insert.
WARNING!!!
HOT GLASS – WILL CAUSE BURNS.
DO NOT TOUCH GLASS UNTIL COOLED
NEVER!!! ALLOW CHILDREN TO TOUCH THE GLASS.
PLEASE NOTE.
The tool that has been provided is for the operation of
the air control lever and for opening and closing the
masonry insert door.
WARNING!
If this tool is not used there is a risk of BURNS.
A - Air supply open:
(when lighting the fire or
adding new wood). The
control lever is pushed
completely to the right. The
firebox will now receive the
maximum volume of com-
bustion air and secondary
air.
B - Controlled burning:
Control lever approx. 20
mm further than the closed air supply position. This
ensures that the fire does not receive too much air and
the wood does not burn too quickly. The secondary air
flows over the panel ventilation system to the ceramic
glass panel and prevents, as far as
possible, any sooting of the glass panel.
C - Air supply closed:
Control lever in the limit position of the 20 mm wide
spacer. The firebox receives no combustion air in this
setting.
WARNING
The combustion-air damper should NOT be altered for
increased firing for any reason!
WARNING
DO NO SHUT OFF THE COMBUSTION AIR OFF
WHILE THE FIRE IS BRUNING
OR WHILE THERE ARE STILL GLOWING COALS IN
THE FIREBOX!
Summary of Contents for Insert-600
Page 26: ...26 10 6 FOR YOUR INFORMATION...
