43
Caution:
Never close the air lever of the air control completely or before the fire has started
to burn efficiently as it will create smoke and the fire would be inefficient and the
energy from the wood is wasted.The door should be closed during operation.
Please follow the instructions in the manual to get the best results from your module.
WARNING!!!
HOT GLASS – WILL CAUSE BURNS.
DO NOT TOUCH GLASS UNTIL COOLED
NEVER!!! ALLOW CHILDREN TO TOUCH THE GLASS.
A - Air supply open:
(when lighting the fire or adding new wood). The control lever is pushed
completely to the right. The firebox will now receive the maximum volume of
combustion air and secondary air.
B - Controlled burning:
Control lever approx. 20 mm further than the
closed air supply position. This ensures that the
fire does not receive too much air and the wood
does not burn too quickly. The secondary air
flows over the panel ventilation system to the
ceramic glass panel and prevents, as far as
possible, any sooting of the glass panel.
C - Air supply closed:
Control lever in the limit position of the 20 mm wide spacer. The firebox
receives no combustion air in this setting.
WARNING
The combustion-air damper should NOT be altered for increased
firing for any reason!
PLEASE NOTE:
The tool that has been provided is for the operation of the air control lever and for
opening and closing the fireplace door.
WARNING!
If this tool is not used there is a risk of BURNS.
Summary of Contents for M 700 INSERT
Page 40: ...40...
Page 56: ...56 10 6 FOR YOUR INFORMATION...
Page 57: ...57 10 6 FOR YOUR INFORMATION...
Page 58: ...58 10 6 FOR YOUR INFORMATION...
