51
7.6 CARE OF GLASS
If the glass is not kept clean
permanent discolouration and
/ or blemishes may result.
Normally a hot fire will clean
the glass. The most common
reasons for dirty glass include:
not using sufficient fuel to get
the appliance thoroughly hot,
using green or wet wood, clos-
ing the draft so far that there
is insufficient air for complete
combustion.
If it is necessary to clean the glass, buff lightly with a clean dry cloth and
non-abrasive cleaner.
DO NOT CLEAN GLASS WHEN HOT! Clean the glass after the first 10 hours of opera-
tion with a suitable stove glass cleaner. Thereafter clean as required.
The glass is very strong but do not let burning fuel rest or fall against it
and always close the door gently. NEVER FORCE IT SHUT!
If the glass should ever crack or break while the fire is burning, do not
open the door until the fire is out and do not operate the appliance again
until the glass has been replaced, available from your Authorized dealer.
DO NOT USE SUBSTITUTE MATERIALS.
7.7 CLEANING THE GLASS CERAMIC SHEET
WARNING
THE GLASS CERAMIC SHEET MAY ONLY BE CLEANED WHEN COLD (FIRE-
PLACE Module NOT BURNING AND COOLED DOWN; NO HOT ASH IN THE
FIRE CHAMBER).
WARNING
All Spartherm modules are supplied with Robax glass in the door.
Robax is a ceramic glass.
Do not use substitute glass and order replacement glass from Spartherm
through your dealer.
WARNING
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Summary of Contents for M 700 INSERT
Page 40: ...40...
Page 56: ...56 10 6 FOR YOUR INFORMATION...
Page 57: ...57 10 6 FOR YOUR INFORMATION...
Page 58: ...58 10 6 FOR YOUR INFORMATION...
