GB
10
b) Then open the door as far as possible and deactivate design A1. To do
this, tighten the grub screw that is located on the bottom on the hinge
side with an Allen key.
Then take the tiled stove door out of the tiled stove - to do this lift the door
on the hinge side and pull it downwards and forwards.
2. Replacement of locking pin
c) Use an open-end wrench to dismount the locking pin.
d) Mount the locking pin on the opposite side, where a bore is provided.
3. Insertion of the „new“ door
Insert the „new“ door - to do this, slide the door with the upper pivot
hinge into the provided bores. Then open the door 90° and fit the lower
pivot hinge (hexagonal) into the provided bore.
e) Reactivate design A1. To do this, unscrew the grub screw that is located
on the bottom on the hinge side with a 3 mm Allen key.
Now check the door for proper function! If the door does not close on its
own, it must be readjusted. If the door does not close on its own, operation
is not permitted.
f) Finally, reinsert the securing clip on the upper pivot hinge.
a+f)
c)
d)
b+e)
Summary of Contents for Nova F
Page 1: ...GB Installation and Operating Manual Nova F...
Page 17: ...GB GB GB 17 NOTES...
Page 18: ...GB 18 NOTES...
Page 19: ...GB GB GB 19...
