background image

GB

 16

9. COMMISSIONING PROTOCOL

Date:

Device no.:  
see rating plate)

Name and address of fireplace operator

Name and address
of heating system installation company:
Name and address
of stove fitter:

Heating system ventilated:

 yes 

no

Has the actual delivery pressure been checked?

Negative pressures greater than 20-25 Pa can influence correct 
operation. In this regard, contamination of the view pane can 
increase or noise can be intensified!

 yes 

no

Operating pressure checked

 yes 

no

System tested for leaks:

 yes 

no

All safety devices
(thermal discharge safety device, safety valve, membrane expansion 
vessel) checked: 

 yes 

no

 yes 

no

Enter temperatures between insert and return flow boost:
Return flow temperature in 

°C

Flow temperature in 

°C

Visual inspection of the heating system:

 yes 

no

Function check executed:

 yes 

no

Fireplace operator has been instructed concerning operation, and the
Installation and Operating Manual has been handed out:

Signatures

Stove fitter         /         Operator         /          Installer

ATTENTION:

 Keep in a safe place! 

Please keep the manual with a valid and clearly dated purchase receipt in a safe place and keep the documents on hand for our fitters in the event of possible 
service tasks.

Summary of Contents for Nova F





















Reviews: