Spartherm Nova F, Installation And Operating Manual

GB

 4

The fireplace can be operated manually or with suitable combustion control-
lers and appropriate settings. If necessary, consult with Spartherm Feu-
erungstechnik GmbH in this regard.

1.1 SCOPE OF DELIVERY

Nova F tested in accordance with DIN EN 13229 WA with the following 
features:

•  Tiled stove with chamotte lining and hinged door.
•  Carrying aids
•  Flue gas outlet
•  Combustion air duct
•  Materials that come into contact with fire made of temperature-resistant 

steel to 1200°C; material 1.4841

•  Support bearing

The following components are available as options:
•  S-Thermatik, combustion controller with temperature display for buffer 

tank temperature · Coasting temperature unit (heat recovery section)

1. GENERAL INSTRUCTIONS

Prior to setup and installation of the tiled stove system, Nova F, a discussion 
must be conducted with your responsible district master chimney sweep. He 
will advise you of building law regulations, the suitability of your chimney, 
and will execute the acceptance procedure of your tiled stove. The chimney 
calculation is executed in accordance with DIN EN 13384 with the value 
triplet specified in this manual (see technical data).

OUR HEATING INSERT HAS BEEN TESTED IN ACCORDANCE WITH 
DIN EN 13229 AND SATISFIES THE REQUIREMENTS STIPULATED 
IN THE  CONSTRUCTION PRODUCTS DIRECTIVE. (DECLARATION OF 
 PERFORMANCE IS AVAILABLE AND CAN BE VIEWED AT  
WWW.SPARTHERM.COM)

Small children, elderly or infirm persons: As is the case with all heat-
ing devices, it is expedient that you attach a protective fixture for these 
groups of persons, as the view pane and also the cladding parts can 
become  extremely hot! Danger of burn injuries! Never leave these groups 
of  persons  unattended near the fireplace when a fire is burning or has 
just been  extinguished! National and European standards, the  respective 
 state-specific and local directives and regulations, in particular the 
 respective firing installation ordinance of the German Federal State, must 
be  complied with for the setup and operation of your fireplace insert and for 
the  connection to the chimney

The fireplace must always be operated with a self-closing door. Modification 
of the closing device is prohibited! Coasting temperature surfaces can be 
integrated in the connecting line to the chimney. These downstream heating 
surfaces must only reduce the flue gas temperature to the extent possible 
for safe and suitable operation of the flue gas system!