GB
GB
13
3.6.1 MINIMUM DIMENSIONS FOR FURNITURE
CONSTRUCTION
3.6.1.1 QUADRA INSIDE I SL
• The minimum dimension for the cover plate / table-top (Fig. 4) is at least
738 x 333 mm (width x depth).
• The cutaway for the Quadra Inside I SL measures 689 x 224 mm and it
is cut centrally into the cover plate / table-top.
1
Quadra Inside I SL
2
Cover plate / table-top
• The minimum distance between housing and base of housing area (Fig.
5) measures 70 mm.
• Ensure that additional air can flow into the housing area without
obstruction. Free cross section for additional air is 200 cm². To this end,
appropriate inlet apertures must be provided.
3.6.1.2 QUADRA INSIDE II SL
• The minimum dimension of the cover plate / table-top (Fig. 6) measures
at least 1250 x 400 mm (width x depth).
• The cutaway for the Quadra Inside II SL measures 1188 x 223 mm and
is cut centrally into the cover plate / table-top.
1
Quadra Inside II SL
2
Cover plate / table-top
• The minimum distance between housing and floor of housing area (Fig.
7) measures 70 mm.
• Ensure that additional air can flow into the housing area without obstruc-
tion. Free minimum cross section for additional air measures 400 cm².
To this end, appropriate inlet apertures must be provided.
Fig. 4 Minimum dimensions of upper/table-top plate
Fig. 5 Minimum dimensions for housing space
min.
min.
Fig. 6 Minimum dimensions for upper/table-top plate
min.
min.
Fig. 7 Minimum dimensions of housing space
