GB
GB
27
4.3 FUEL
Bioethanol (chemical formula C
2
H
6
O) with an ethanol content of 96.6% is
used as the fuel. This can be purchased from specialist dealers. This is a
hazardous substance as defined by ADR: Class 3 PG III, UN 1170.
Under no circumstances should other fuels such as petrol, spirit or similar
flammable liquids be used. Do not mix the fuels together or with other
substances. The burners may only be operated using the prescribed fuel
otherwise the warranty will be rendered void and the device may be unsafe
or dangerous to operate.
Ethanol is a highly flammable liquid which must be stored well sealed, pro-
tected from light and away from sources of fire. It is permitted to store max.
5 l in the living space and max. 20 l in the cellar. Keep bioethanol out of
the reach of children. For your safety only fill the burner just before use to
prevent it from being ignited unintentionally or by unauthorised persons and
to also stop the fuel from evaporating.
Please note that ethanol is used exclusively for combustion and it not suit-
able for consumption. Supervise your children! If swallowed consult a doctor
immediately and present the fuel label.
4.4 COMMISSIONING
The ebios-fire Quadra Inside is supplied with an empty burner to prevent any
ethanol from flowing out or evaporating during transit. Ensure (particularly
before being put into use) that there is no fuel in the safety container.
4.4.1 COMMISSIONING OF THE QUADRA INSIDE SL
Proceed as follows:
1. Ensure that the air supply is sufficient.
2. Make sure that the burner has gone out and has cooled down fully
(minimum waiting time after being extinguished = 1 hour).
3. The burner can remain in the housing when being
refilled. Open the housing cover. Depending on
the installation situation, the protective panes
may need to be removed. When being installed in
a bespoke fire area (chimney system) the burner
should be filled outside the housing (the level indi-
cator must be clearly visible)
4. Check the tank content.
5. Make sure that the cover plate is placed on the
burner and covers the burner fleece.
6. Use a wrench to open the filling screw.
7. Insert the funnel into the filling opening and
pour a maximum of 2.6 l of bioethanol into
each burner unit.
