GB
4
IMPORTANT INFORMATION
As per the German Equipment and Product Safety Act (GPSG) and our statutory duty to notify, we would like to inform you about heating with this product.
As per our statutory duty to notify, we would like to inform you about heating with this product: The Bio chimney combustion heat with:
• Quadra Inside I SL – 0.5 l / hr amounts to approx. 3300 Watts
• Quadra Inside II SL – 1.0 l / hr amounts to approx. 6600 Watts
• Quadra Inside III SL – 1.5 l / hrs measures approx. 9900 Watts
The calorific value of 96.6% ethanol equates to approx. 29,600 kJ / kg. With fuel consumption in the:
• Quadra Inside I SL (0.5 l/hr approx. 0.4 kg/hr)
= heat released approx. 3300 Watts
• Quadra Inside II SL (1.0 l/hr approx. 0.8 kg/hr
= heat released approx. 6600 Watts
• Quadra Inside III SL (1.5 l/hr approx. 0.8 kg/hr
= heat released approx. 9900 Watts
However, the decorative fireplace requires a plentiful supply of fresh air when operated as otherwise the amount of carbon dioxide created exceeds the permitted
concentration in the room air.
As a rule, the fresh air supplied is cooler than the room air to be heated up which results in a loss of energy. The effective heat output of a biofuel fireplace is thus
minimal and, as such, decorative fireplaces which use biofuel are not sources of heat.
This is a decorative fireplace that is not intended for heating or continuous operation. Nevertheless, it should be taken into account that heat is generated as a
by-product of the combustion process. This can cause increased heating in the room where the fireplace is installed. Read the safety instructions and measures for
rear ventilation carefully.
Observe these operating instructions.
