Notice
1.This product needs to be installed and debugged by a qualified electrician.
2.The power supply of this product should has special circuits, there must be good grounding
line of protection, the cable should be fixed for ever, the sectional area of the power supply cable
should be thicker than ≥ 4mm2, users must install electric leakage switches in the supply line
that the movement electric current is 30mA and the specified electric current is 16A.
3.The power as AC 220V ±10%, 50HZ. (Products for export is customized as required).
AC110/60Hz also available.
4.The water pressure as 0.2~0.6Mpa.
5.The temperature of hot water supplied to the bathtub Should be cooler than 70
℃.
6. Maintaining must go on under the disconnection power.
2. The products of our company are altered the old and bringing forth the new constantly, if
has content difference with the original manual, will not issue a separate notice, please forgive.
1. The content in this manual, is the total introduction for the function of all types and conf
iguration, it is not all models that have these functions and conf iguration.
9.This equipment not supply to the people who with low corporeity, slow reaction or mental
impedient, and including children, if this or such people need to use this equipment that a
security responsibility for the guidance or assistance of safe is require. Children must be under
the protection of an adult to use this equipment, so as to ensure its process is not in the shower
caused play equipment unknown danger.
8. Strictly prohibit to start the water pump while no water, so as not to damage the seal
gasket of the water pump.
7. A child, old man without self-care ability mustn't use alone.
10.The grounding quipment should always be connected to the fixed cabling. And It should
be install a whole extreme switch on the location of over 3mm of the connection point in the fixed
cabling.
Note:
13
